Oil Transf. to Daily Tanks Pressure Units
Applications & Specific Features:
-Main tank to daily service tank oil transfer.
-Oil supply to one or multiple generators.
-Installations with large height differences between main storage and daily service tanks.
-Any oil supply for ‘tank to tank’ automated by a signal from the daily tank level switch to the FP unit.
-Special FP units available for aggressive or heated nonstandard fuels.
Accessories and adaptations:
-Oil failure control system, to protect gears running with an empty tank.
-Free voltage relay output to control from centralized Building Management System, in kit 3, 4 or 6 signals (2-thermal, motors 1 or 2 ON, low pressure and Leak safety ON).
-GSM alarm system by SMS messages, or connection to modem.
-Adaptation of Pressure Group for high pressure, working conditions of up to 4,5 Kg/cm2
-Leak collector trays with infrared detectors (standard in FP 240 and above)
-Modifications to adapt to specifically regulated environments (tropicalized equipment or ATEX.)
-Solenoid valves with flow limiters, to automate filling in supply tanks for electrical generators.
-Soundproof sheet cabinets with UNE-25 poly-pyramid foam and lock. Manufactured with no back and made-to measure for each Pressure Group model.
-Assembly of Pressure Groups in IP-55 cabinets for outdoor installation wi
– (*) There is a 230 single-phase version power supply version (W) – For other capacity and mediums, please consult. – Threaded Flanges DIN 2566
